Product Description

16139823 Ga37

Product Description

 

Model number: 16139823 replace by Coupling Element 16148738-670 applies to the screw air compressor GA 90-160,807,1410 New.

Coupling Features

• Good starting performance can change the load starting of the motor to no-load starting, so as to realize the soft starting of the working machine, reduce the current during starting and reduce the starting energy consumption.
• Save electric energy and equipment cost, which can solve the unreasonable situation of the big horse-drawn trolley with load starting machine, save the motor capacity, improve the power factor and motor efficiency of the grid, reduce reactive power loss, save electric energy, and simplify the motor starting equipment and reduce equipment cost.
• The transferred torque can be adjusted, easy to achieve overload protection.When the working machine is overloaded or jammed, the steel ball type safety coupling will slip automatically, which can prevent the motor from burning out and other parts damage.
• Except for the starting and braking stages, the main and driven parts of the steel ball safety coupling have no speed difference, no friction loss and high transmission efficiency.
• Nonmetallic elastic elements are adopted in the steel ball type safety coupling, which can compensate the offset of the linked 2 axes within a certain range, with a small amount of buffering and damping.
• Reliable operation, stable performance, convenient installation, disassembly and maintenance.

Determining the right type of flexible coupling starts with the following analysis of the application:

• Prime mover type (motor, diesel engine, etc.) of the drive side of the system
• Actual horsepower and/or torque requirements, not prime motor-rated horsepower (note the range of variable torque caused by periodic or unstable loads, worst-case starting loads,
• Drive system inertia related to prime mover inertia (data available from equipment supplier)
• vibration, linear and torsional vibration (experienced supplier or consultant can help you evaluate vibration) shaft-to-shaft deviation;
• Note the degree of Angle offset (axis is not parallel) and parallel offset (distance between axis centers when axes are parallel but not aligned);
• Also note whether the drive/driven units share the same floor axial (inside/outside) axial motion,
• whether they share distance (the distance between the drive end and the driven axis), and any other space-related restrictions.

 

Detailed Photos

 

 

We are able to offer a wide range of special couplings, which are based on your samples or drawings.

Due to the refinement of production operations and the high-end technology, we have been able to produce high-quality Rubber Coupling, Trolley Wheel, Flexible Coupling, Flexible Rubber Coupling, Industrial Rubber Coupling, Star Coupling, CHINAMFG type Coupling Spare and other products, widely used in industrial applications.

 

All these products are tested and checked against the set quality parameters before being sent to the customer. This shows that we are willing to provide our customers with updated and perfect product lines to meet their different needs. In addition, we also provide customized solutions to provide customers with a wide range of space, so that they can choose their favorite products according to their needs and requirements.
 

More Products for Choose

Coupling	Coupling
1613949900	1613982300
1614873800	1613958500
165710800	165710800
162357100	1619646700
1615678500	165714700
1615682500	1604076100
1613982300	1626510900

Tips:
  This is only a part of the part numbers, many oil separator filters P/N are not listed, in addition there are replacements filters for many other air compressor brands.

 

Company Profile

       Now over 100,000 quality filters including compressed air filters, Hydraulic Filters and complete filter housing assemblies at wholesale discounts. We offer OEM products as well as high quality replacements, engineered to precise OEM specifications and guaranteed to match the exact form, fit and function as the original equipment. Our company is committed to continuous innovation and further improvement to create, improve the efficiency and productivity of excellence, to achieve the highest level of reliability and performance.

Company team

Our company is located in the beautiful coastal city of HangZhou,is a professional manufacturer of air compressor filters and separators,

We repect the enterprise spirit of “steadyfastness,hard work and responsibility” and creat a good corporate environment based on the operation principle of “Integrity,reliability and innovation”.

 

 

With the survival idea of “perfect technology, good service and excellent quality”,
We always adhere to customer first,
aim at serving customer sincerely and touching customer with our service.

We plunge ourselves to provide clear and sustainable comprssed air to our customer,
meanwhile constantly pursue to save the sunning cost of compressor system for them.
Profession, concentration, focus is our corporate philosophy.

 

 

FAQ

 Q1. What is your product range?
A: Our products cover replacement hydraulic filter, Air compressor filters, Compressed air filter element, Heavy truck insert filters, Vacuum pump filters, and Some spare parts for compressors.

Q2. Is customized filter or OEM available? 
A: Yes, just offer your required specifications and drawings.

Q3. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings. We can build new molds, but open new mold fee charged, when you place bulk order, the mold fee can return back.

Q4. What’s your terms of packing?
A: Generally, we pack our goods in neutral boxes,outside brown carton cases. If you have legally registered patent, we can pack the goods in your branded boxes after getting your authorization letters.

Q5. What’s the terms of payment?
A: T/T 30% as deposit, and 70% before delivery. We’ll show you the photos of the products and packages before you pay the balancing.

Q6. What’s your terms of delivery?
A: (1)FOB (2)CFR (3)CIF.

Q7. How about your delivery time?
A: Generally, under MOQ quantity take 5-7 working days after receiving your advance payment. The specific delivery time depends on models and the quantity of your order.

Q8. What’s your sample policy?
A: ,,,.

/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Elastomeric Couplings and Handling Torque Spikes and Sudden Load Changes

Elastomeric couplings are designed to handle torque spikes and sudden changes in load, thanks to the inherent flexibility and damping properties of the elastomeric material. Here’s how they manage such scenarios:

1. Damping Effect:

When a sudden increase in torque or load occurs in the machinery, the elastomeric coupling’s flexible element acts as a buffer, absorbing and dissipating the excess energy. This damping effect helps prevent the transmission of shock loads to the connected equipment, reducing the risk of damage.

2. Torsional Compliance:

Elastomeric couplings have a certain level of torsional compliance, which allows them to tolerate brief torque spikes without transmitting excessive forces to the connected shafts. This torsional compliance is essential in applications where sudden load changes are common.

3. Misalignment Compensation:

Elastomeric couplings can accommodate some degree of misalignment between the shafts. When torque spikes or sudden loads lead to minor misalignments, the coupling can flex and compensate for these changes, reducing the stress on the machinery.

4. Vibration Absorption:

If torque spikes or sudden loads result in torsional vibrations, the elastomeric material can absorb and dampen these vibrations, preventing them from propagating through the system and causing additional damage.

5. Material Selection:

The selection of appropriate elastomeric materials and coupling design factors in the anticipated torque and load requirements. Couplings can be designed to handle specific torque spikes and loads based on the elastomer’s hardness and properties.

Despite their ability to handle torque spikes and sudden load changes, it is essential to consider the specific application requirements when choosing an elastomeric coupling. Factors such as the magnitude and frequency of torque spikes, load characteristics, and operating conditions must be taken into account to ensure the coupling’s compatibility and reliability.

Properly selected and maintained elastomeric couplings provide effective torque transmission and help protect connected equipment from the impact of sudden changes in load, contributing to the overall efficiency and longevity of the machinery.

Impact of Temperature Variation on Elastomeric Coupling Performance

Temperature variation can significantly affect the performance of elastomeric couplings due to the properties of the elastomeric material used in their construction. Here are the key ways temperature variation can influence coupling performance:

1. Elasticity and Flexibility:

Elastomeric materials exhibit changes in their elasticity and flexibility with temperature. At lower temperatures, the elastomer may become stiffer, reducing its ability to compensate for misalignments and absorb vibrations. Conversely, at higher temperatures, the elastomer may become softer, affecting the coupling’s torsional stiffness and load-carrying capacity.

2. Damping Characteristics:

Temperature changes can impact the damping characteristics of the elastomer. Elastomeric couplings rely on the damping properties of the material to absorb vibrations and shocks. Temperature-related variations can alter the material’s ability to dampen vibrations, affecting the coupling’s performance in reducing dynamic loads.

3. Wear and Degradation:

Elastomeric materials can undergo wear and degradation with temperature fluctuations. Excessive heat can accelerate the aging process of the elastomer, leading to material hardening, cracking, and reduced service life. Extreme temperature conditions may also cause the elastomer to soften and lose its structural integrity.

4. Tolerance to High Temperatures:

Some elastomeric couplings are designed to withstand higher temperatures than others. Extreme heat can cause traditional elastomeric materials to exceed their temperature limits, leading to failure or reduced performance. Specialized high-temperature elastomers or alternative materials may be required for applications operating in elevated temperature environments.

5. Torque and Power Ratings:

Temperature changes can influence the torque and power ratings of the elastomeric coupling. It is essential to consider the temperature variation when selecting a coupling for a specific application to ensure that it can handle the expected loads safely and reliably.

6. Environmental Conditions:

Elastomeric couplings operating in extreme temperature environments may also encounter other environmental factors like humidity, chemicals, and exposure to harsh substances, which can further impact the material properties and coupling performance.

To mitigate the effects of temperature variation on elastomeric coupling performance, it is crucial to select a coupling with suitable elastomeric material capable of withstanding the expected temperature range. Regular maintenance, periodic inspection, and adherence to the manufacturer’s temperature limits and guidelines will help ensure optimal performance and prolong the lifespan of the coupling in temperature-varying operating conditions.

Limitations and Drawbacks of Using Elastomeric Couplings in Specific Scenarios

While elastomeric couplings offer several advantages, they may not be the ideal choice for every scenario. There are some limitations and drawbacks to consider, particularly in specific industrial applications. Here are some key points to be aware of:

1. Torque Capacity:

Elastomeric couplings may have limitations in handling high torque levels. In heavy-duty applications with significant torque requirements, a different type of coupling, such as a gear coupling or grid coupling, might be more suitable.

2. Temperature Range:

Elastomeric materials have temperature limitations. In environments with extreme temperatures, such as high-temperature industrial processes or cryogenic applications, elastomeric couplings may degrade or lose their flexibility, affecting their performance and lifespan.

3. Chemical Compatibility:

Some chemicals or aggressive substances may degrade the elastomeric material used in the coupling. In such cases, alternative coupling materials, like stainless steel or special coatings, should be considered.

4. High-Speed Applications:

In applications with high rotational speeds, elastomeric couplings might experience dynamic issues like resonance or flutter, which can lead to premature wear or failure. High-speed applications often require specialized couplings, such as disc couplings or diaphragm couplings.

5. Stiffness and Torsional Rigidity:

For applications requiring precise motion control or minimal angular deflection, elastomeric couplings might not provide the necessary stiffness or torsional rigidity. In such cases, rigid couplings or precision couplings are better suited.

6. Axial Load Handling:

Elastomeric couplings are primarily designed for torque transmission and misalignment compensation. They may not be suitable for handling significant axial loads between connected shafts.

7. Maintenance in Harsh Environments:

In environments with abrasive particles, high humidity, or other harsh conditions, elastomeric couplings might require more frequent maintenance to prevent premature wear.

8. Space Limitations:

Due to their flexible design, elastomeric couplings might require more space compared to some other coupling types. In compact or space-constrained applications, alternative couplings with more compact designs might be preferred.

Despite these limitations, elastomeric couplings remain highly versatile and effective in numerous industrial applications. However, it’s crucial to carefully consider the specific requirements and operating conditions of each application to determine whether an elastomeric coupling is the best choice or if an alternative coupling type might be more suitable.

editor by CX 2023-12-25