Type: Gear Flex Coupling

Applied: Atlas Copco

Certificate: iso 9001.

Coupling Selection Method

• Torque – power [kW] • Speed [r/min]
• Type of equipment and application
• Shaft diameters
• Shaft gaps
• Physical space limitation
• Special bore or finish information

Coupling Features

• Good starting performance can change the load starting of the motor to no-load starting, so as to realize the soft starting of the working machine, reduce the current during starting and reduce the starting energy consumption.
• Save electric energy and equipment cost, which can solve the unreasonable situation of the big horse-drawn trolley with load starting machine, save the motor capacity, improve the power factor and motor efficiency of the grid, reduce reactive power loss, save electric energy, and simplify the motor starting equipment and reduce equipment cost.
• The transferred torque can be adjusted, easy to achieve overload protection.When the working machine is overloaded or jammed, the steel ball type safety coupling will slip automatically, which can prevent the motor from burning out and other parts damage.
• Except for the starting and braking stages, the main and driven parts of the steel ball safety coupling have no speed difference, no friction loss and high transmission efficiency.
• Nonmetallic elastic elements are adopted in the steel ball type safety coupling, which can compensate the offset of the linked 2 axes within a certain range, with a small amount of buffering and damping.
• Reliable operation, stable performance, convenient installation, disassembly and maintenance.

Detailed Photos

Determining the right type of flexible coupling starts with the following analysis of the application:

• Prime mover type (motor, diesel engine, etc.) of the drive side of the system
• Actual horsepower and/or torque requirements, not prime motor-rated horsepower (note the range of variable torque caused by periodic or unstable loads, worst-case starting loads,
• Drive system inertia related to prime mover inertia (data available from equipment supplier)
• vibration, linear and torsional vibration (experienced supplier or consultant can help you evaluate vibration) shaft-to-shaft deviation;
• Note the degree of Angle offset (axis is not parallel) and parallel offset (distance between axis centers when axes are parallel but not aligned);
• Also note whether the drive/driven units share the same floor axial (inside/outside) axial motion,
• whether they share distance (the distance between the drive end and the driven axis), and any other space-related restrictions.

We are able to offer a wide range of special couplings, which are based on your samples or drawings.

Due to the refinement of production operations and the high-end technology, we have been able to produce high-quality Rubber Coupling, Trolley Wheel, Flexible Coupling, Flexible Rubber Coupling, Industrial Rubber Coupling, Star Coupling, CHINAMFG type Coupling Spare and other products, widely used in industrial applications.

All these products are tested and checked against the set quality parameters before being sent to the customer. This shows that we are willing to provide our customers with updated and perfect product lines to meet their different needs. In addition, we also provide customized solutions to provide customers with a wide range of space, so that they can choose their favorite products according to their needs and requirements.
 

More Products for Choose

Tips:
  This is only a part of the part numbers, many oil separator filters P/N are not listed, in addition there are replacements filters for many other air compressor brands.
 

Company Profile

       Now over 100,000 quality filters including compressed air filters, Hydraulic Filters and complete filter housing assemblies at wholesale discounts. We offer OEM products as well as high quality replacements, engineered to precise OEM specifications and guaranteed to match the exact form, fit and function as the original equipment. Our company is committed to continuous innovation and further improvement to create, improve the efficiency and productivity of excellence, to achieve the highest level of reliability and performance.

Company team

Our company is located in the beautiful coastal city of HangZhou,is a professional manufacturer of air compressor filters and separators,

We repect the enterprise spirit of “steadyfastness,hard work and responsibility” and creat a good corporate environment based on the operation principle of “Integrity,reliability and innovation”.

With the survival idea of “perfect technology, good service and excellent quality”,
We always adhere to customer first,
aim at serving customer sincerely and touching customer with our service.

We plunge ourselves to provide clear and sustainable comprssed air to our customer,
meanwhile constantly pursue to save the sunning cost of compressor system for them.
Profession, concentration, focus is our corporate philosophy.

Packaging & Shipping

FAQ

 Q1. What is your product range?

A: Our products cover replacement hydraulic filter, Air compressor filters, Compressed air filter element, Heavy truck insert filters, Vacuum pump filters, and Some spare parts for compressors.

Q2. Is customized filter or OEM available? 
A: Yes, just offer your required specifications and drawings.

Q3. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings. We can build new molds, but open new mold fee charged, when you place bulk order, the mold fee can return back.

Q4. What’s your terms of packing?
A: Generally, we pack our goods in neutral boxes,outside brown carton cases. If you have legally registered patent, we can pack the goods in your branded boxes after getting your authorization letters.

Q5. What’s the terms of payment?
A: T/T 30% as deposit, and 70% before delivery. We’ll show you the photos of the products and packages before you pay the balancing.

Q6. What’s your terms of delivery?
A: (1)FOB (2)CFR (3)CIF.

Q7. How about your delivery time?
A: Generally, under MOQ quantity take 5-7 working days after receiving your advance payment. The specific delivery time depends on models and the quantity of your order.

/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Contribution of Elastomeric Couplings to Mechanical System Efficiency

Elastomeric couplings play a significant role in enhancing the overall efficiency of mechanical systems in various ways:

1. Power Transmission Efficiency:

Elastomeric couplings efficiently transmit torque from one shaft to another, minimizing energy losses during power transmission. Their flexibility allows them to maintain continuous contact with the shafts, reducing backlash and ensuring efficient torque transfer.

2. Misalignment Compensation:

Shaft misalignments can occur due to various factors like thermal expansion, manufacturing tolerances, or structural shifts. Elastomeric couplings can accommodate angular, parallel, and axial misalignments, ensuring that the system remains properly aligned during operation. This reduces stress on connected components, conserving energy and extending the lifespan of the machinery.

3. Vibration Damping:

Elastomeric materials have excellent damping properties that help reduce vibrations and oscillations in rotating machinery. By absorbing and dissipating vibrational energy, these couplings decrease the impact of vibrations on the system, improving overall efficiency and reducing wear on components.

4. Shock Load Absorption:

During sudden torque spikes or load changes, elastomeric couplings act as shock absorbers, cushioning the impact and preventing the propagation of shock loads to connected equipment. This protects the machinery from damage and enhances its overall efficiency and reliability.

5. Noise Reduction:

Elastomeric couplings’ ability to dampen vibrations also contributes to noise reduction in mechanical systems. Reduced vibration levels lead to quieter operation, making elastomeric couplings beneficial in noise-sensitive environments.

6. Cost-Effectiveness:

Elastomeric couplings are generally cost-effective compared to some other coupling types, providing efficient power transmission at a lower cost. Their ease of installation and maintenance further add to their cost-effectiveness.

7. Protection Against Overloads:

In case of overloads or sudden changes in operating conditions, elastomeric couplings protect the system by absorbing excess energy and preventing damage to connected machinery. This protection helps avoid costly downtime and repairs.

8. Easy Installation and Maintenance:

The simplicity of elastomeric coupling designs facilitates easy installation and maintenance, reducing downtime and maintenance costs. Periodic inspections and lubrication, where required, help maintain the coupling’s efficiency and extend its service life.

Overall, elastomeric couplings enhance mechanical system efficiency by optimizing power transmission, compensating for misalignments, reducing vibrations and noise, absorbing shock loads, and providing cost-effective and reliable performance. Properly selected and maintained elastomeric couplings contribute to the smooth and efficient operation of various industrial machinery and equipment.

Standard Specifications and Industry Norms for Elastomeric Couplings

Yes, there are standard specifications and industry norms that govern the design, manufacturing, and performance of elastomeric couplings. These standards ensure that elastomeric couplings meet specific criteria for quality, reliability, and safety. Some of the widely recognized standards and norms for elastomeric couplings include:

1. American National Standards Institute (ANSI):

ANSI provides standards and guidelines for elastomeric couplings used in various industrial applications. ANSI standards cover design considerations, dimensions, materials, torque ratings, and performance testing for elastomeric couplings.

2. International Organization for Standardization (ISO):

ISO develops international standards for elastomeric couplings, ensuring consistency and interoperability across different regions and industries. ISO standards cover coupling performance, dimensions, and testing methods.

3. American Society of Mechanical Engineers (ASME):

ASME standards include guidelines for elastomeric couplings, providing information on design, installation, maintenance, and inspection practices to ensure safe and reliable operation.

4. American Gear Manufacturers Association (AGMA):

AGMA publishes standards related to elastomeric couplings used in power transmission systems. These standards cover coupling design, selection, application, and maintenance guidelines.

5. European Committee for Standardization (CEN):

CEN develops European standards for elastomeric couplings to promote uniformity and compliance across European countries.

Manufacturers often use these standards as a reference when designing and testing elastomeric couplings. Compliance with these standards helps ensure that the couplings meet minimum quality and performance requirements. Additionally, many industries have specific regulations and norms related to safety, which elastomeric couplings must adhere to when used in their applications.

When selecting an elastomeric coupling, it is essential to verify if it complies with the relevant standards and industry norms to guarantee its suitability and safety for your specific application. Manufacturers typically provide documentation stating the compliance of their couplings with the applicable standards.

How to Select the Right Elastomeric Coupling for a Particular Application

Selecting the appropriate elastomeric coupling for a specific application involves considering several key factors to ensure optimal performance, efficiency, and reliability. Here’s a step-by-step guide to help you make the right choice:

1. Load Requirements:

Start by determining the torque and power requirements of your application. Consider both the steady-state and peak loads to select a coupling that can handle the maximum expected load without exceeding its torque capacity.

2. Misalignment Tolerance:

Evaluate the expected misalignment between the connected shafts. Elastomeric couplings are excellent at compensating for small misalignments, but for larger misalignments, special designs or alternative coupling types may be more suitable.

3. Speed and RPM:

Understand the rotational speed (RPM) at which the coupling will operate. High-speed applications may require more rigid couplings to avoid dynamic issues, while low-speed applications can benefit from the damping effect of elastomeric couplings.

4. Environmental Conditions:

Consider the environmental factors that the coupling will be exposed to, such as temperature, humidity, chemical exposure, and presence of abrasive particles. Choose a coupling material that can withstand these conditions without compromising performance.

5. Space Constraints:

If you have limited space in your application, look for compact elastomeric couplings that can fit within the available area without sacrificing performance.

6. Electrical Isolation:

In applications where electrical isolation is required, select an elastomeric coupling made from an electrically insulating material.

7. Maintenance:

Consider the maintenance requirements of the coupling. Elastomeric couplings are generally low-maintenance, but if your application involves harsh conditions, you might need to inspect and replace the coupling more frequently.

8. Manufacturer Recommendations:

Always consult with the coupling manufacturer for their recommendations and technical specifications. Manufacturers can provide valuable insights and guidance based on your specific application requirements.

9. Cost Consideration:

Compare the cost of different elastomeric couplings while keeping in mind their performance and longevity. Striking the right balance between cost and quality is essential.

By carefully evaluating these factors and matching them to the characteristics of available elastomeric couplings, you can select the most suitable coupling for your particular application. Proper coupling selection ensures reliable power transmission, longer equipment lifespan, and reduced downtime in industrial systems.

editor by CX 2024-01-19