Product Description
Hot High Performance Gr48 Flex Coupling Element Kit for Screw Air Compressor Spare Parts GR65 GR38 GR55 GR28 GR42 GR75 GR90 Coupling Rubber
Product Description
Model number: GR65 GR38 GR55 GR28 GR42 GR75 GR90
Type: Gear Flex Coupling
Applied: Atlas Copco
Certificate: iso 9 replace by Coupling Element 16148738-670 applies to the screw air compressor GA 90-160,807,1410 New.
Coupling Features
- Good starting performance can change the load starting of the motor to no-load starting, so as to realize the soft starting of the working machine, reduce the current during starting and reduce the starting energy consumption.
- Save electric energy and equipment cost, which can solve the unreasonable situation of the big horse-drawn trolley with load starting machine, save the motor capacity, improve the power factor and motor efficiency of the grid, reduce reactive power loss, save electric energy, and simplify the motor starting equipment and reduce equipment cost.
- The transferred torque can be adjusted, easy to achieve overload protection.When the working machine is overloaded or jammed, the steel ball type safety coupling will slip automatically, which can prevent the motor from burning out and other parts damage.
- Except for the starting and braking stages, the main and driven parts of the steel ball safety coupling have no speed difference, no friction loss and high transmission efficiency.
- Nonmetallic elastic elements are adopted in the steel ball type safety coupling, which can compensate the offset of the linked 2 axes within a certain range, with a small amount of buffering and damping.
- Reliable operation, stable performance, convenient installation, disassembly and maintenance.
Determining the right type of flexible coupling starts with the following analysis of the application:
- Prime mover type (motor, diesel engine, etc.) of the drive side of the system
- Actual horsepower and/or torque requirements, not prime motor-rated horsepower (note the range of variable torque caused by periodic or unstable loads, worst-case starting loads,
- Drive system inertia related to prime mover inertia (data available from equipment supplier)
- vibration, linear and torsional vibration (experienced supplier or consultant can help you evaluate vibration) shaft-to-shaft deviation;
- Note the degree of Angle offset (axis is not parallel) and parallel offset (distance between axis centers when axes are parallel but not aligned);
- Also note whether the drive/driven units share the same floor axial (inside/outside) axial motion,
- whether they share distance (the distance between the drive end and the driven axis), and any other space-related restrictions.
Detailed Photos
We are able to offer a wide range of special couplings, which are based on your samples or drawings.
Due to the refinement of production operations and the high-end technology, we have been able to produce high-quality Rubber Coupling, Trolley Wheel, Flexible Coupling, Flexible Rubber Coupling, Industrial Rubber Coupling, Star Coupling, CHINAMFG type Coupling Spare and other products, widely used in industrial applications.
All these products are tested and checked against the set quality parameters before being sent to the customer. This shows that we are willing to provide our customers with updated and perfect product lines to meet their different needs. In addition, we also provide customized solutions to provide customers with a wide range of space, so that they can choose their favorite products according to their needs and requirements.
More Products for Choose
| Coupling | Coupling |
| 1613949900 | 1613982300 |
| 1614873800 | 1613958500 |
| 165710800 | 165710800 |
| 162357100 | 1619646700 |
| 1615678500 | 165714700 |
| 1615682500 | 1604076100 |
| 1613982300 | 1626510900 |
Tips:
This is only a part of the part numbers, many oil separator filters P/N are not listed, in addition there are replacements filters for many other air compressor brands.
Company Profile
Now over 100,000 quality filters including compressed air filters, Hydraulic Filters and complete filter housing assemblies at wholesale discounts. We offer OEM products as well as high quality replacements, engineered to precise OEM specifications and guaranteed to match the exact form, fit and function as the original equipment. Our company is committed to continuous innovation and further improvement to create, improve the efficiency and productivity of excellence, to achieve the highest level of reliability and performance.
Company team
Our company is located in the beautiful coastal city of HangZhou,is a professional manufacturer of air compressor filters and separators,
We repect the enterprise spirit of “steadyfastness,hard work and responsibility” and creat a good corporate environment based on the operation principle of “Integrity,reliability and innovation”.
With the survival idea of “perfect technology, good service and excellent quality”,
We always adhere to customer first,
aim at serving customer sincerely and touching customer with our service.
We plunge ourselves to provide clear and sustainable comprssed air to our customer,
meanwhile constantly pursue to save the sunning cost of compressor system for them.
Profession, concentration, focus is our corporate philosophy.
FAQ
Q1. What is your product range?
A: Our products cover replacement hydraulic filter, Air compressor filters, Compressed air filter element, Heavy truck insert filters, Vacuum pump filters, and Some spare parts for compressors.
Q2. Is customized filter or OEM available?
A: Yes, just offer your required specifications and drawings.
Q3. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings. We can build new molds, but open new mold fee charged, when you place bulk order, the mold fee can return back.
Q4. What’s your terms of packing?
A: Generally, we pack our goods in neutral boxes,outside brown carton cases. If you have legally registered patent, we can pack the goods in your branded boxes after getting your authorization letters.
Q5. What’s your terms of delivery?
A: (1)FOB (2)CFR (3)CIF.
Q6. How about your delivery time?
A: Generally, under MOQ quantity take 5-7 working days after receiving your advance payment. The specific delivery time depends on models and the quantity of your order.
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
Design Considerations for Enhancing Elastomeric Coupling Durability
Elastomeric couplings can be designed to enhance their durability and performance in various mechanical power transmission applications. Here are some key design considerations:
1. Material Selection:
Choosing the appropriate elastomeric material based on the specific application requirements is critical for ensuring durability. Factors such as temperature range, chemical exposure, load capacity, and resistance to wear and tear should guide the material selection process.
2. Torque and Load Ratings:
The coupling’s design should consider the expected torque and load requirements of the application. Ensuring that the coupling’s torque and load ratings are well-matched to the operating conditions helps prevent premature failure due to overloading.
3. Misalignment Compensation:
Elastomeric couplings are known for their ability to accommodate misalignment between shafts. Properly designing the coupling to handle the anticipated misalignment angles and offset distances will prevent excessive stress on the elastomer and increase its longevity.
4. Damping and Vibration Control:
Integrating features to enhance the coupling’s damping capabilities can help reduce vibrations and dampen shocks and impacts. This reduces the overall stress on the coupling and connected equipment, contributing to improved durability.
5. Torsional Flexibility:
Providing adequate torsional flexibility in the coupling design allows it to absorb sudden torque spikes and fluctuations, preventing potential damage to the machinery and enhancing durability.
6. Corrosion Resistance:
In environments where corrosion or chemical exposure is a concern, incorporating corrosion-resistant materials or protective coatings in the coupling design can extend its service life.
7. Lubrication and Maintenance:
Some elastomeric couplings may require periodic lubrication to minimize friction and wear. Designing the coupling to facilitate easy maintenance can ensure it remains in optimal condition throughout its operational life.
8. Finite Element Analysis (FEA):
Using FEA during the design phase allows engineers to simulate real-world operating conditions and identify potential stress concentrations. This enables the optimization of the coupling’s shape and material distribution for enhanced durability.
By carefully considering these design aspects, engineers can create robust and durable elastomeric couplings that provide reliable performance and contribute to the overall efficiency and longevity of the mechanical systems they serve.
Impact of Temperature Variation on Elastomeric Coupling Performance
Temperature variation can significantly affect the performance of elastomeric couplings due to the properties of the elastomeric material used in their construction. Here are the key ways temperature variation can influence coupling performance:
1. Elasticity and Flexibility:
Elastomeric materials exhibit changes in their elasticity and flexibility with temperature. At lower temperatures, the elastomer may become stiffer, reducing its ability to compensate for misalignments and absorb vibrations. Conversely, at higher temperatures, the elastomer may become softer, affecting the coupling’s torsional stiffness and load-carrying capacity.
2. Damping Characteristics:
Temperature changes can impact the damping characteristics of the elastomer. Elastomeric couplings rely on the damping properties of the material to absorb vibrations and shocks. Temperature-related variations can alter the material’s ability to dampen vibrations, affecting the coupling’s performance in reducing dynamic loads.
3. Wear and Degradation:
Elastomeric materials can undergo wear and degradation with temperature fluctuations. Excessive heat can accelerate the aging process of the elastomer, leading to material hardening, cracking, and reduced service life. Extreme temperature conditions may also cause the elastomer to soften and lose its structural integrity.
4. Tolerance to High Temperatures:
Some elastomeric couplings are designed to withstand higher temperatures than others. Extreme heat can cause traditional elastomeric materials to exceed their temperature limits, leading to failure or reduced performance. Specialized high-temperature elastomers or alternative materials may be required for applications operating in elevated temperature environments.
5. Torque and Power Ratings:
Temperature changes can influence the torque and power ratings of the elastomeric coupling. It is essential to consider the temperature variation when selecting a coupling for a specific application to ensure that it can handle the expected loads safely and reliably.
6. Environmental Conditions:
Elastomeric couplings operating in extreme temperature environments may also encounter other environmental factors like humidity, chemicals, and exposure to harsh substances, which can further impact the material properties and coupling performance.
To mitigate the effects of temperature variation on elastomeric coupling performance, it is crucial to select a coupling with suitable elastomeric material capable of withstanding the expected temperature range. Regular maintenance, periodic inspection, and adherence to the manufacturer’s temperature limits and guidelines will help ensure optimal performance and prolong the lifespan of the coupling in temperature-varying operating conditions.
Can Elastomeric Couplings Handle Misalignment Between Shafts Effectively?
Yes, elastomeric couplings are designed to handle misalignment between shafts effectively. Their flexible and resilient elastomeric material allows them to accommodate various types of misalignment, including:
- Angular Misalignment: When the axes of the two connected shafts are not collinear and form an angle, elastomeric couplings can flex and compensate for this angular misalignment. This is crucial in applications where shafts are not perfectly aligned due to manufacturing tolerances, installation errors, or structural settling.
- Parallel Misalignment: When the axes of the two shafts are not perfectly parallel but have some lateral offset, elastomeric couplings can accommodate this misalignment by allowing a certain degree of lateral movement between the hubs.
- Axial Misalignment: When the two shafts are not perfectly aligned along their common axis, causing a gap or overlap between them, elastomeric couplings can flex and absorb this axial misalignment, preventing excessive forces on the connected machinery.
The elastomeric material used in these couplings acts as a natural shock absorber and isolates vibrations, which helps prevent excessive wear on equipment and reduces the risk of damage to connected components. Elastomeric couplings are also capable of dampening transient vibrations caused by sudden torque fluctuations or shock loads.
However, it is important to note that while elastomeric couplings can handle moderate misalignments, they have their limitations. Large misalignments beyond their design capabilities may lead to premature wear and reduced coupling life. In such cases, special designs or alternative coupling types may be more suitable.
Overall, elastomeric couplings are a popular choice in many industrial applications due to their ability to effectively handle misalignment, providing reliable and smooth power transmission while protecting machinery from excessive stresses and vibrations.
editor by CX 2024-03-03